12oz Egg Shape Stainless Steel Tumbler OEM | Bluegreen

Product Highlights

A short coffee or tea serving does not need a 30–40oz travel cup, and a ceramic cup is a poor fit for printed gifts. A 12oz egg shape stainless steel coffee cup is sized for that single pour: small enough for a desk or picnic table, with a continuous wall for a logo.

• 12oz capacity for one coffee or tea serving; no millilitre figure is published on this page.
• Egg-shaped body with no handle; the grip is the waist of the cup.
• Stainless steel drink-contact wall for print or laser engraving.
• Color box 9 × 9 × 12.5cm; export carton 47 × 47 × 52cm, 100pcs, 19.5kg net / 20.5kg gross.
• Custom color and logo on the same body for stock, gift, or private label runs.

Lid type, steel grade, leakproof rating, and hold time are not published here. Confirm each on the approval sample against the method you will use in your market.

Specifications

Customization and MOQ

One 12oz egg-shaped cup can support several channel versions once color, logo process, lid, and pack-out are locked. Office programs usually need a single logo position and a gift-ready color box. Hospitality and retail gift sets may need a different colorway and a window box or sleeve. Private label runs can change the outer carton while keeping the same 12oz fill.

Confirmed custom options: logo print or laser engraving, and custom color. Lid and pattern artwork are not confirmed on this page and should be stated in the RFQ if required. Packaging structure is available once artwork and dielines are agreed.

MOQ is 100pcs. Samples are charged; the fee is refundable after a qualifying bulk order. Do not treat a catalog photo as the production standard. Approve color, logo size and position, lid fit if a lid is specified, and packaging on a signed sample before mass production.

Certifications and Buyer Checks

No material declaration, food-contact file, or factory audit is listed here because the required set depends on the destination market. Before sampling, state the target market, the documents you need (material declaration, labeling language, and any lab test scope), and the method you will use to judge seal and temperature hold. Do not print hour claims or a leakproof grade until those checks are agreed.

On the approval sample, check at least: sit-down stability of the egg-shaped base on a flat table; grip at the waist with a hot fill; sipping flow and splash if a lid is specified; open-close cycles on that lid; stainless marking if you require it on the base or documents; solid or gradient color match to the approved swatch; logo size, position, and process; and color-box / carton marks. A side handle does not apply to this body. Unit weight is not derived from the 19.5kg carton net weight.

Applications

Desk and breakfast use is the primary job: one 12oz coffee or tea serving that sits beside a keyboard or plate, not a second travel cup and not a ceramic cup that chips in transit. The same size works on a picnic or patio table where a stemmed glass or a 30–40oz cup is the wrong scale. Hospitality buyers can specify a single colorway for place settings; corporate buyers can run the same body as a printed gift.

A table wine pour can use the same 12oz cup when the program does not want a separate glass line. That is a secondary table use. It does not change the product type to a wine cup or a tumbler, and it is not the search intent of this page.

Do not position this cup for car-cup-holder commuting, sports-bottle carry, or shared serving. Those jobs need a different body, lid, and capacity.

Why Choose Us

The main procurement risk on a small stainless coffee cup is printing a lid grade or a hold-time claim that the approval sample cannot support. This page does not publish either figure. Lock steel grade, lid, color, logo, and pack-out on a signed sample, then print only what that sample and method can repeat.

Send an RFQ with: order quantity, target color, logo file and process, lid preference or open-top, packaging structure, destination market, required documents, and the test method you will use for seal and temperature. Use the contact / RFQ page so those fields stay in one request.

MOQ is 100pcs. Samples are charged; the fee is refundable after a qualifying bulk order. Carton data on this page is 100pcs / 47 × 47 × 52cm / 19.5kg net / 20.5kg gross. Ask for a second carton plan only if your market needs a different pack-out.

• Selling Units:

  piece

• Single package size:

  8.7 x 8.7 x 11.7 cm

• Single gross weight:

  165 g

• Packing size:

  47 x 47 x 52 cm

• Packing gross weight:

  19.5 kg

• Packing net weight:

  20.5 kg

• Packing quantity:

  100  piece